What to do if Pioneer ELITE VSX-LX505 Receiver is operating erratically?
If your Pioneer Receiver is operating erratically, try restarting the unit. If the issue persists, consider resetting the unit, which will restore the settings to their defaults. As an alternative, try unplugging and plugging back in the power cords or HDMI cable of the unit and connected devices.
Why does 'AMP Diag Mode' appear on my Pioneer ELITE VSX-LX505 Receiver display?
The appearance of 'AMP Diag Mode' on the display of your Pioneer Receiver indicates that the protection circuit function may have been activated. To resolve this, set the receiver to standby, then reconnect the speaker cable.
What to do if my Pioneer Receiver stopped with 'NG' displayed?
If your Pioneer Receiver has stopped operating and displays 'NG', immediately set the unit to standby and remove the power plug from the outlet. The unit may be malfunctioning. Consult a dealer.
General| Channels | 9.2 |
|---|---|
| HDMI Inputs | 7 |
| 4K/120Hz and 8K/60Hz Pass-Through | Yes |
| IMAX Enhanced | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Amplification Type | Class AB |
| THX Certified | No |
| HDMI 2.1 | Yes |
| HDCP 2.3 | Yes |
| eARC | Yes |
| Dolby Atmos Height Virtualization | Yes |
| DTS Virtual:X | Yes |
| Roon Tested | Yes |
| Dirac Live | Yes |
| Zone 2 | Yes |
| Phono Input | Yes |
| Power Output | 120 W/ch (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2ch Driven) |
| Frequency Response | 10Hz-100kHz |
| Total Harmonic Distortion | 0.08% |
| HDR Support | HDR10, Dolby Vision, HLG |
| HDMI Outputs | 2 |
| Zone 2/Zone 3 | Yes |
| Streaming Services | Spotify, TIDAL, Deezer, Amazon Music, Pandora, TuneIn |
| Voice Control | Amazon Alexa, Google Assistant |
| Outputs | HDMI (2) |
| Supported Audio Formats | MP3, WMA, AAC, WAV, FLAC, ALAC, AIFF |
| Inputs | 7 HDMI, 4 analog, 1 coaxial, 1 phono, 2 optical |
Identification and description of the front panel controls and indicators on the unit.
Overview of the buttons and functions of the included remote controller.
Diagrams and descriptions of various speaker configurations and connections.
Guide on how to physically set up speakers according to room environment.
Detailed guide on connecting various speaker systems to the unit.
Instructions on how to connect a powered subwoofer to the unit.
How to play audio from connected AV components like Blu-ray players.
How to pair and play audio wirelessly from BLUETOOTH enabled devices.
Instructions for tuning and listening to AM, FM, and DAB radio stations.
How to quickly adjust frequently used settings like tone and sound delay.
How to enjoy audio in separate rooms (Zone 2/Zone 3) while performing playback in the main room.
Steps to enjoy internet radio services like TuneIn Radio after network connection.
Overview of system settings, including input/output assignments, speaker config, and audio adjustments.
Guide to automatic speaker setup and room calibration.
Settings for network connections and BLUETOOTH functions.
Step-by-step guide for initial unit setup using the on-screen wizard.
Steps to take when the unit exhibits unusual behavior or errors.
Troubleshooting steps related to power issues and unexpected shutdowns.
Troubleshooting for BLUETOOTH connectivity and playback issues.
Solutions for problems related to network connectivity and internet radio.
Troubleshooting steps when a USB storage device is not recognized or playback is interrupted.
Table showing selectable listening modes for various speaker layouts.
Technical specifications of the unit, including amplifier, video, tuner, and Bluetooth sections.
To Next Page
