To Next PageTo Next Page
Need help?Do you have a question about the Pioneer GM-6200F and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 10 Hz - 50 kHz |
| THD at Rated RMS Power | 0.05% |
| THD | 0.05% |
| Signal-to-Noise Ratio | 100 dB |
| Input Voltage | 14.4V |
| Fuse Rating | 30A |
| Input Sensitivity | 0.2 - 6 Volts |
Information regarding user modifications and their effect on operating rights.
Details about recording the amplifier's serial number for security and future reference.
Contact information and procedures for after-sales service and warranty support.
Instructions for registering the product online for updates and information.
Adjusting gain controls to match car stereo output and prevent distortion.
Switch to select between two-channel and four-channel input signals.
Selects Low-Pass Filter (LPF) or High-Pass Filter (HPF) for audio frequency output.
Adjusts BFC switch to address beats during AM broadcasts.
Indicator light shows when the amplifier is powered on.
Safety and operational precautions for connecting the unit and wiring.
Recommended speaker impedance and power ratings for proper connection.
Detailed steps for preparing and connecting speaker wires to output terminals.
Instructions for connecting car stereo speaker outputs to the amplifier's speaker input.
Safety and operational precautions to consider before and during amplifier installation.
Step-by-step guide for physically mounting the amplifier onto a floor mat or chassis.
Details on the unit's protective function to prevent malfunction and speaker damage.
Guidance on setting the gain control for optimal sound output and preventing distortion.
Covers warranty validity, product period, and exclusions for purchased products.
States that warranties are void if the product is purchased from unauthorized distributors.
Instructions on how to obtain warranty service in the USA and Canada.
Details the process for resolving disputes with Pioneer regarding warranty claims.
