Do you have a question about the Pioneer MVH-170UB and is the answer not in the manual?
Details on how to operate the unit using its buttons and controls.
Guides through the initial setup steps after installation, including language and clock.
How to reset the unit to factory default settings and configure initial options.
Step-by-step guide to connect and pair Bluetooth devices with the unit.
Instructions for making calls using the connected Bluetooth phone.
How to answer or reject incoming calls via Bluetooth.
Adjusting the balance between front/rear and left/right speakers.
Customizing sound profiles with equalizer, loudness, subwoofer, bass boost, and HPF.
Crucial safety and operational notes before and during installation.
Detailed guide to connecting power, speakers, and other components.
Information on connecting the ISO connector based on vehicle wiring.
Instructions for connecting an external power amplifier and speakers.
Guides for DIN front-mount and rear-mount installation procedures.
Instructions for mounting the unit using the supplied bracket.
Recommended placement for optimal voice pickup, avoiding driving obstruction.
Instructions for attaching the microphone to the sun visor.
Steps to detach and mount the microphone on the steering column.
Solutions for display returning to normal, unexpected repeat play, and subfolder playback.
Addressing intermittent sound, interference, and Bluetooth audio source problems.
Explains common errors like AMP ERROR, NO XXXX, FORMAT READ, NO AUDIO, and USB errors.
Troubleshooting Bluetooth connection failures and application errors.
Details on power, dimensions, weight, maximum power output, and audio parameters.
| MP3 playback | Yes |
|---|---|
| CD-R playback | No |
| Supported radio bands | AM, FM |
| Preset stations quantity | 24 |
| RDS features | AF, TA |
| Product color | Black |
| Ready for iPod | - |
| Equalizer bands quantity | 5 |
| Display type | LCD |
| Display number of lines | 1 lines |
| USB version | 2.0 |
| Line outputs (RCA) | 1 |












Loading...