Pioneer ND-BC010 - User Manual

To Next Page

P1c,n'8cer

ND-BC010

Owner's Manual

UNIVERSAL

REAR-VIEW

CAMERA

INCLUDED PARTS / HARNESS DETAILS

ACC. SIGNAL (+12 V DC)

VIDEO OUTPUT

GROUND

POWER I VIDEO CABLE

REAR / FRONT

SETTING

LOOP

(WHITE WIRES)

CAMERA

UNIT

CAMERA WITH MOUNTING

BRACKET

SPECIFICATIONS

••

··t7

. '

Image view

Sensor type

Line resolution

Resolution (Pixel)

Min. illumination

Viewing angle

Video system

Voltage & max. current

Waterproof

Operation temperature

Storage temperature

Compliance statement

Selectable (Mirror Image

default)

High quality CMOS

960

lines equivalent

470,000 pixels

0.1

Lux~0.01 Lux

170°

NTSC (Color)

9 V DC to 16 V DC, 100

IP67 / IP68

-30°C ~ + 70°C

-30°C ~ +85°C

FMVSS

111

INFORMATION TO THE USER >

Alteration

modifications carried out without appropriate authorization may invalidate the user's

right to operate the equipment.

FEDERAL COMMUNICATIONS COMMISSION SUPPLIER'S DECLARATION OF CONFORMITY

Product Name:

Model Number:

Responsible Party Name:

Universal Rear-view Camera

ND-BC010

PIONEER ELECTRONICS (USA) INC.

SERVICE SUPPORT DIVISION

Address: 970

190th STREET, SUITE 360, TORRANCE CA90502,

USA

Phone: (800) 421-1404

URL: http://www.pioneerelectronics.com

CAN ICES-3 B/NMB-3 B

PIONEER CORPORATION

28-8, Honkomagome 2-chome, Bukyo-ku, Tokyo 113-0021, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O.

BOX 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

Need help?

Do you have a question about the Pioneer ND-BC010 and is the answer not in the manual?

The Pioneer ND-BC010 is a universal rear-view camera designed to enhance driver visibility and safety by providing a symmetrical image of the area behind a vehicle, similar to rear and side-view mirrors. It is intended to supplement, not replace, the driver's rear view, and users are advised to always look behind them when reversing to confirm the view.

Function Description:

The ND-BC010 serves as a rear-view camera, offering a wide-angle perspective of the area behind the vehicle. It connects to a display unit (not included) via an RCA video input and is powered by the vehicle's 12-volt battery system. The camera provides a selectable image view, with a mirror image as the default setting, which is crucial for accurate perception when reversing. It is designed for use in vehicles with a 12-volt battery and negative grounding. The camera comes with a mounting bracket and necessary wiring for installation.

Important Technical Specifications:

Image View: Selectable (Mirror Image as default).
Sensor Type: High quality CMOS.
TV Line Resolution: 960 TV lines equivalent.
Resolution (Pixel): 470,000 pixels.
Min. Illumination: 0.1 Lux~0.01 Lux.
Viewing Angle: 170°.
Video System: NTSC (Color).
Voltage & Max. Current: 9 V DC to 16 V DC, 100 mA.
Waterproof Rating: IP67/IP68. This indicates the camera is dust-tight and protected against the effects of temporary immersion in water.
Operation Temperature: -30°C ~ +70°C.
Storage Temperature: -30°C ~ +85°C.
Compliance: FMVSS 111, CAN ICES-3 B/NMB-3 B.

Usage Features:

Wide-Angle Lens: The camera features a wide-angle lens, which provides a broad view of the near area but can make the far view appear narrower, potentially creating a false sense of distance. Users should be aware of this characteristic and confirm the view by looking behind them when reversing.
Adjustable Mounting: The camera mounting base can be positioned either vertically or horizontally, allowing for flexible installation. The mounting bracket itself is designed to be disassembled to hide the characters on the license plate when attaching the camera.
Setting Loops: The unit includes "rear/front setting loops" (white wires) that can be cut to adjust the camera's settings, although the specific functions of these loops are not detailed in the provided excerpt.
Ignition Connection: For vehicles without an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition ON/OFF operations to prevent battery drain.
Compatibility: The camera is compatible with TVs that have an RCA video input and a reverse gear connection function.

Maintenance Features:

Installation by Specialist: Installation and wiring require specialist skill and experience. It is recommended to request a specialist technician to install the unit to ensure safety and proper functioning.
Avoid Extreme Heat: Do not attempt to heat the camera lens with a lighter or similar device if it becomes frozen, as this can cause a malfunction.
Washing Precautions: Avoid washing the vehicle with an automatic car wash or high-pressure water, as this may lead to water entering the camera or causing it to fall off.
Regular Checks: Before driving, check that the camera stand installation is secure and that screws are not loose to prevent accidents caused by a loose camera.
Wiring Security: All wiring should be routed and secured with cable clamps or adhesive tape to prevent contact with moving parts (e.g., gear shift, parking brake, seat rails) or hot areas (e.g., heater outlet). This prevents insulation melting, tearing, and potential short-circuiting.
Battery Disconnection: To avoid short-circuits during installation, the battery cable should be disconnected before beginning the process.
Fuse Replacement: If a fuse needs replacement, a specialist technician should be consulted to ensure the correct specification is used.
Noise Minimization: To minimize noise, the TV antenna cable, radio antenna cable, and RCA power supply cable should be located as far away from each other as possible.
Surface Preparation: For mounting, the installation surface should be cleaned with a cloth or other item to remove oil, wax, dust, and other dirt. The protective sheet from the camera stand's adhesive should be peeled off, and the unit should be pressed firmly onto the surface for a second time after initial placement to ensure secure adhesion. If the adhesive surface is low, warm it with a hair dryer or other means before installing.
Moisture on Attachment Surface: If moisture is present on the attachment surface, it reduces adhesive strength.
Post-Installation Check: After installation, ensure the camera is firmly attached and does not obstruct the rear view.
Regular Cleaning: Do not apply water to the unit directly. Do not expose the unit to rain. Do not subject the camera to unnecessary force.

Pioneer ND-BC010 Specifications

General

Brand	Pioneer
Model	ND-BC010
Category	Digital Camera
Language	English

Related product manuals

Pioneer 2

14 pages