Need help?Do you have a question about the Pioneer SBX-300 and is the answer not in the manual?
General| Audio decoders | Dolby Digital, DTS |
|---|---|
| RMS rated power | 130 W |
| Audio output channels | - channels |
| Impedance | 4 Ω |
| Total Harmonic Distortion (THD) | 10 % |
| Subwoofer type | Active subwoofer |
| Subwoofer included | Yes |
| Receiver included | No |
| FM radio | - |
| Product color | Gray |
| Bluetooth profiles | A2DP, AVRCP |
| Apple docking compatibility | Not supported |
| HDMI ports quantity | 0 |
| Connectivity technology | Wired & Wireless |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 2 |
| AC input voltage | 110-220 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 36 W |
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
This equipment is not waterproof. To prevent fire or shock hazard, do not place containers with liquid near it.
To prevent fire hazard, do not place naked flame sources on the equipment.
Ensure at least 10 cm space at sides and top for heat dissipation.
Do not block ventilation openings to prevent overheating and fire hazards.
The STANDBY/ON switch does not fully disconnect power; unplug unit to ensure complete shutdown.
Proper guidelines for handling the power cord to avoid electric shock and damage.
Instructions for initial remote control setup, including battery installation.
Connect TV, BD, DVD, or CD players via optical digital audio output.
Connect satellite tuners or other devices with coaxial digital audio output.
Connect TV or portable audio players using a 3.5-mm stereo mini jack.
Connect the IR cable for TV remote control functionality.
Steps to output sound from connected devices, including volume and mute controls.
Pairing and connecting Bluetooth devices for wireless music playback.
Checks and remedies for issues with sound output and cable connections.
Solutions for problems with power, remote control, and indicator status.
To Next Page
