Need help?Do you have a question about the Pioneer TS-WX20LPA and is the answer not in the manual?
General| Rated power | 200 W |
|---|---|
| Sensitivity | 101 dB |
| Speaker type | - |
| Frequency range | 50 - 125 Hz |
| Separate components | No |
Weight and Dimensions| Woofer diameter | 200 mm |
|---|
Ensure the vehicle's negative battery cable is disconnected to prevent electrical shock during installation.
Use only supplied cords and do not remove fuses for proper protection circuit function.
The TS-WX20LPA must be securely anchored in the passenger compartment to prevent movement.
Verify the drilling area for gas lines, brake lines, or electrical wiring before creating mounting holes.
Do not install the unit in any area where it may become wet to prevent damage.
Diagram and instructions for connecting the unit using speaker line inputs and accessory power.
Diagram and instructions for connecting the unit using RCA inputs and system remote control output.
Provides specifications for speaker size, cone, voice coil, magnet, and sensitivity.
Outlines amplifier power output, input levels, power requirements, and current draw.
To Next Page
