Pioneer VSX-519V-S Service Manual

ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
2009 Printed in Japan
VSX-519V-K
RRV3897
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-519V-K
VSX-519V-S
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Remarks
VSX-519V-K MYSXCN5 AC 220 V to 230 V
VSX-519V-S MYSXCN5 AC 220 V to 230 V
For details, refer to "Important Check Points for good servicing".
T-ZZK MAR,

Pioneer VSX-519V-S Specifications

General

Type	Stereo Receiver
Channels	5.1
Frequency Response	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
HDMI Inputs	3
HDMI Output	1
Component Video Output	1
Composite Inputs	4
Digital Audio Inputs	2 Optical, 1 Coaxial
Analog Audio Inputs	5
Subwoofer Output	1
Surround Sound Formats	Dolby Digital, DTS
HDMI Version	1.3a
Input Sensitivity/Impedance	200 mV / 47 k ohms
Signal-to-Noise Ratio	98 dB
Speaker Impedance	6 - 16 ohms
Tuner Type	AM/FM
Power Output Details	6 ohms, 1 kHz, 1 channel driven

Summary

SAFETY INFORMATION

1. SAFETY PRECAUTIONS

General safety guidelines for service technicians during repairs.

2. PRODUCT SAFETY NOTICE

Information on product-specific safety characteristics and components.

Important Check Points for Good Servicing

1. Product safety

Adherence to regulations and maintaining a safe servicing environment.

1. SERVICE PRECAUTIONS

1.1 NOTES ON SOLDERING

Guidelines and precautions for using lead-free solder on circuit boards.

2. SPECIFICATIONS

2.1 SPECIFICATIONS

Detailed technical specifications covering audio, video, tuner, and miscellaneous sections.

4. BLOCK DIAGRAM

4.5 POWER SUPPLY BLOCK DIAGRAM

Block diagram illustrating the main power supply sections and voltage distribution.

5. DIAGNOSIS

5.1 DIAGNOSIS FLOWCHART

Step-by-step troubleshooting flowcharts for diagnosing common problems.

5.2 DETECTION CIRCUIT

Circuit diagrams related to the unit's protection mechanisms and detection systems.

6. SERVICE MODE

6.1 SERVICE MODE

Instructions for accessing and operating the service mode for error monitoring.

10. SCHEMATIC DIAGRAM

10.1 P.C.B SUB ASSY (MAIN) and P.C.B SUB ASSY (P/T)

Schematic diagrams for the main processing and power transformer PCB assemblies.

10.3 P.C.B SUB ASSY (AMP)

Schematic diagram for the amplifier (AMP) circuit board.

11. PCB CONNECTION DIAGRAM

11.4 P.C.B SUB ASSY (AMP)

PCB connection diagram for the amplifier (AMP) circuit board.