To Next PageTo Next Page
Need help?Do you have a question about the Pioneer VSX-5500S and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | VSX-5500S |
| Category | Stereo Receiver |
| Language | English |
Guidelines for grounding outdoor antennas to protect against voltage surges and static charges.
Instructions for setting voltage selector and channel step/FM de-emphasis switches.
Highlights of the receiver's capabilities including surround, volume control, and video functions.
Lists the items included with the receiver, such as antennas and remote control.
Explains different surround modes like Stadium, Simulated Surround, and Dolby Surround.
Illustrates speaker placement for different surround sound experiences.
Details VCR Noise Filter and Simulated Stereo functions for enhanced audio playback.
Diagrams and instructions for connecting audio components like turntables, CD players, and tape decks.
Proper methods for connecting the power cord for U.S. and Canadian models.
Instructions for connecting video sources like VCRs and video disc players to the receiver and TV.
Guides on connecting speakers, including front, center, and rear, and using the impedance selector.
Diagrams for connecting the receiver with separate power amplifiers or preamplifiers.
Illustrates how to connect the receiver in a multi-amplifier system configuration.
Demonstrates audio connections, including the use of a graphic equalizer with a cassette deck.
Shows video connections for VCRs and monitor TVs.
Details on FM/AM antenna terminals, ground terminal, and rear amplifier jacks.
Explains center out jack, rear speaker terminals, and remote control IN/OUT jacks.
Covers video output jacks, speaker terminals, and AC outlets.
Details on impedance selector, various input jacks, and pre-amp/power amp jacks.
Explains connections for VDP/CDV players and VCRs, including input and output jacks.
Instructions for connecting the multi-room remote control adaptor for extended control.
Overview of the power switch, tuning selectors, and input selector buttons on the front panel.
Highlights controls for surround modes, volume, tone, and video enhancement.
Introduces the various indicators and displays on the front panel of the receiver.
Details on the power standby/on switch, VCR noise filter, and TV/video signal selector.
Explains automatic/manual tuning, direct access tuning, and acoustic memory settings.
Covers FM mode selection, tuning switches, rear level, return, muting, and balance controls.
Details on split screen, enhancer, and video enhancer controls for picture quality.
Explains surround mode selectors, delay time, speaker switches, and input selector functions.
Details on memory scan, memory storage, band selection, and station call functions.
Describes indicators for TV antenna, muting, tape, station, scan, tuned, FM mono, and stereo reception.
Explains indicators for video signal, enhancer, simulated stereo, tuning modes, and sleep timer.
How to tune stations by directly inputting their frequencies using the station call switches.
Step-by-step guide for using auto tuning to scan for stations and manual tuning for precise selection.
Instructions for storing desired broadcast stations and their frequencies using preset switches.
Guide on how to assign custom names or call letters to preset stations for easy recall.
Explains how to select various input sources like records, CDs, tapes, VCRs, and video discs using the input selector.
How to receive stereo TV sound transmitted from FM radio stations while viewing video on TV.
Instructions for connecting and viewing video sources from VCRs or other video components on a TV.
Steps for recording audio sources to a cassette deck, including preset station tuning.
Procedures for copying tapes between decks and monitoring recorded sound through the speaker system.
Guide on recording sound onto a video tape using the Hi-Fi VCR.
Instructions for copying video tapes and using enhancer functions for better picture quality.
How to listen to playback sound while changing video images independently for recording.
A visual representation of the audio and video signal paths within the receiver.
Advice on installing external FM antennas and proper grounding techniques for clear reception.
Recommendations for using indoor or outdoor AM antennas to improve AM signal reception.
Instructions for inserting batteries and understanding the effective range and angles of the remote control.
Guidance on battery replacement and proper handling to ensure optimal performance and prevent damage.
Explains how to set the transmit mode selector for controlling audio or video equipment.
Details on using the remote for input selection, power on/standby, return, and muting functions.
How to control surround modes, delay time, volume, and acoustic settings using the remote.
Instructions for operating the tuner section and turntable using the remote control.
How to use the remote control to operate TV functions like channel selection and volume.
Explains how to use the remote for CD player operations like track search, playback, and programming.
Details on using the remote for LD player operations such as chapter skip, playback, and display functions.
Instructions for controlling cassette deck functions like recording, playback, and tape transport.
How to use the remote for VCR operations including power, recording, playback, and channel selection.
Instructions for battery installation and understanding the operational range and angles of the remote.
Guidance on battery replacement and proper handling to ensure optimal performance and prevent damage.
Explanation of the different transmit modes (Audio, Video, Aux) for controlling various devices.
Instructions for setting the LEARN switch and preparing for programming remote control commands.
Details on using the remote for input selection, receiver power, muting, and return functions.
How to adjust surround sound levels, delay time, and master volume using the remote.
Instructions for operating the tuner section and turntable using the VSX-5500S remote.
How to use the remote to control TV functions like channel selection, volume, and display.
Explains how to use the remote for CD player operations like track selection, programming, and playback.
Details on using the remote for VDP (LD player) functions such as chapter search, playback, and program setup.
Explains how the remote can learn commands from other infrared remotes and lists learning keys.
Discusses the maximum number of commands that can be learned and the different operational modes.
Step-by-step guide on how to set the learn switch and place remotes for programming commands.
Addresses common queries regarding learning functions, especially for multi-key operations.
Instructions on how to reset the remote control to its original Pioneer commands.
Solutions for issues like no power, no sound, or no picture, checking connections and settings.
Troubleshooting steps for noise, weak signals, poor reception, and video tape copying failures.
Detailed technical specifications for amplifier power output, FM/AM tuner sensitivity, and distortion.
Covers power requirements, AC outlets, dimensions, weight, and furnished parts.
