To Next PageTo Next Page
Need help?Do you have a question about the Pioneer VSX-523-K and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Power Output (Watts per Channel) | 80 |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Network Connectivity | No |
| 3D Support | Yes |
| 4K Pass-Through | Yes |
| USB Port | Yes |
| Bluetooth | No |
| Wi-Fi | No |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Input Sensitivity/Impedance | 200mV/47k ohms |
| Signal-to-Noise Ratio | 98dB |
| Frequency Response | 5 Hz - 100 kHz, +0 dB/-3 dB |
| Total Harmonic Distortion | 0.08% |
General safety checks, warnings, and product safety notices for technicians.
Guidance on using lead-free solder and soldering iron for environmental protection.
Identifies parts difficult to replace as discrete components; requires whole Assy replacement.
Details amplifier, audio, video, tuner, digital I/O, and miscellaneous specs.
Confirms recommended check points to maintain product quality after repairs.
Shows the main signal flow and connections between major assemblies.
Illustrates the signal path for the audio processing section.
Shows the power distribution and regulation stages.
Provides flowcharts for diagnosing common issues like 'No Power'.
Diagrams for overload, DC, and thermal protection circuits.
Pin functions and descriptions for the main and sub CPU ICs.
How to enter and use display mode for protection detection counts.
Procedure to reset protection detection counts to zero.
Unit behavior and indications during DC error detection.
Unit behavior and indications during overload error detection.
Unit behavior and indications during temperature error detection.
Procedure to cancel key input inhibition after DC error detection.
Procedure for discharging capacitors in MAIN Assy and CPU Assy.
Disassembly and diagnosis procedures for the D-MAIN Assy.
Details adjustments needed after replacing specific assemblies or parts.
