Need help?Do you have a question about the Pioneer VSX-C501-S and is the answer not in the manual?
General| Type | AV receiver |
|---|---|
| Channels | 5.1 |
| Surround Sound Formats | Dolby Digital, DTS |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 200 mV |
| Digital inputs | 1 x coaxial, 2 x optical |
| Video inputs | Composite, S-Video |
| Video outputs | 1 x composite |
| Power Output | 100 watts per channel (6 ohms, 1 kHz, 1% THD) |
| Total Harmonic Distortion (THD) | 0.09 % (at rated output) |
| Speaker impedance | 6-16 ohms |
Safety warnings regarding electric shock, internal parts, and power cord handling.
Precautions for safe appliance handling, placement, and fire prevention, including avoiding naked flames and moisture.
Ensuring adequate space for heat dissipation and proper airflow for the unit.
Instructions for setting the voltage selector switches on multi-voltage models for correct power supply.
Detailed instructions for connecting front, center, surround, and surround back speakers.
Detailed instructions and diagrams for connecting the TV and DVD player to the receiver.
Steps for turning on the system, selecting inputs, and playing a DVD disc.
Details on connecting front, center, surround, and surround back speakers.
Information on connecting digital audio sources via optical and coaxial jacks.
Recommendations for installing the receiver on a stable surface and avoiding certain locations.
Connecting stereo or multichannel analog audio and video from a DVD player.
Connecting digital audio outputs (coaxial/optical) from a DVD player.
Connecting the receiver's video output to the TV's video input.
Connecting the TV's optical digital audio output to the receiver.
Connecting analog audio/video from a set-top box using AV cables.
Connecting digital audio from a set-top box using an optical cable.
Connecting VCR or DVD recorder for playback and recording via analog AV.
Connecting digital audio from a DVD recorder for playback using an optical cable.
Guidance on installing a full surround sound speaker system.
Step-by-step instructions for wiring speakers to the receiver terminals.
Guidelines for positioning speakers to achieve the best surround sound experience.
Connecting the receiver to a Pioneer plasma display using the SR+ cable for enhanced features.
Safe procedures for connecting the receiver's power cable to the outlet.
Buttons for selecting sound modes, stereo, and advanced surround effects.
Explanation of the MCACC system for automatic acoustic calibration of listening areas.
Detailed steps for performing the automatic surround sound calibration.
Explanation of common MCACC error messages and their solutions.
Steps to reset the receiver's settings to their original factory defaults.
Configuring front, center, and surround speaker sizes and types for optimal sound.
Setting distances for front, center, surround, and back speakers.
Adjusting individual speaker channel levels using test tones for balanced sound.
Diagnosing and resolving issues related to power, automatic shutdown, and unit response.
Troubleshooting sound output issues, tuner reception, and radio noise.
Resolving issues with digital connections, playback of digital formats, and signal compatibility.
Troubleshooting playback issues with DVD-Audio, digital formats, and format indicators.
Troubleshooting MCACC setup errors and speaker phasing problems.
To Next Page
