Pioneer VSX-D1S Operating Instructions

Operating
Instructions
AUDIO/VIDEO STEREO RECEIVER
VSX-D15
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card and
keep it ina secure area. This is for your security.
[For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER QUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES NE
PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR
UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
RETURN function
This function returns the unit to a set of initial settings and ready
to broadcast tuner. This is helpful during troubleshooting or when
no sound is output. For details, refer to ‘‘“FRONT PANEL
FACILITIES,” page 19.
RESET function
Use this function when normal operation becomes impossible
because of external influences such as static electricity or lightning,
or when operation is impossible even when operation switches are
pressed. Press the RESET switch to return to normal operating
conditions.
If you press this switch, the entire contents of the memory are
cleared.
About the Demonstration Mode
© The demonstration is activated by turning on the power switch
while holding down the MUTING switch (from power standby
condition). The demonstration will appear on the display.
° Press any other switch to cancel the demonstration.
PIONGER
The future of sound and vision.

Pioneer VSX-D1S Specifications

General

Tuning range	FM
Frequency Response	10 Hz - 100 kHz
Damping factor	60
Input Sensitivity	200 mV (line)
Input Impedance	47 kΩ (line)
Signal to Noise Ratio	100dB (line)
Speaker load impedance	4Ω to 16Ω
Video Connections	Composite video