Need help?Do you have a question about the Piranha IRONWORKER P90 and is the answer not in the manual?
Guidelines for selecting a suitable location and preparing a stable foundation for the machine.
Guidelines for changing the hydraulic filter element to maintain system purity and prevent component failure.
Importance of checking and tightening fasteners and hydraulic connections for machine accuracy and longevity.
Procedures for checking and maintaining the correct hydraulic oil level using the dipstick indicator.
Step-by-step troubleshooting guide for diagnosing why the Piranha Ironworker will not start.
General| Model | P90 |
|---|---|
| Type | Ironworker |
| Brand | Piranha |
| Punching Capacity | 90 tons |
| Angle Shear | 6" x 6" x 1/2" |
| Round Bar Shear | 2" |
| Shear Capacity | 90 tons |
| Motor Power | 10 HP |
| Square Bar Shear | 1-3/4" |
| Voltage | 460V |
To Next Page
