Why is my Piranha YQ-3888 Steam Cleaner not producing steam?
If your Piranha Steam Cleaner isn't producing steam, there could be a few reasons. First, ensure that the power is switched on at the power point. Another reason could be that there is no water in the tank; if this is the case, add water to the water tank. If neither of these solutions works, the thermal fuse may have blown, requiring you to call the service department.
Why is my Piranha YQ-3888 Steam Cleaner ejecting water instead of steam?
If your Piranha Steam Cleaner is ejecting water instead of steam, it could be due to two main reasons. First, there might be too much water in the water tank; empty some water out, ensuring you use a maximum of 250ml. Second, the unit might be tipped over more than 45°; hold the unit upright.
General| Brand | Piranha |
|---|---|
| Model | YQ-3888 |
| Category | Steam Cleaner |
| Language | English |
Details recommended applications for the steam cleaner's capabilities.
Explains built-in safety features like auto shut-off and pressure relief.
Explains how to use steam for killing bacteria and germs.
To Next Page
