EasyManua.ls Logo

PITT Drum - User Manual

PITT Drum
15 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INTS2019-1-PC/NL-EN-FR-DE-ES-IT EU
Top Side
NL Montagehandleiding
EN Installation instructions
FR Notice de montage
DE Montageanleitung
ES Instrucciones de instalación
IT Manuale per l’utente
Question and Answer IconNeed help?

Do you have a question about the PITT Drum and is the answer not in the manual?

Summary

Installation Instructions Top Side

Ensure Flange Concurrency

Ensure flanges are concentric inside cut-outs; off-centre flanges will impair function.

Set Control Knobs

Press control knobs onto gas tabs with dots facing forward, ensuring they spring back.

Tighten Frontal Set Screws

Tighten frontal set screws clockwise to bring the heat conductor up to the worktop.

Adjust Knob Height

Stop tightening when knob bottoms are within sealing scales, 5-7mm above.

Connect and Test Unit

Connect to gas and electricity, ignite burners. Check knob height if flames extinguish.

Important Adjustment Notes

Proper knob adjustment is crucial for burner ignition and even burning. Follow manual precisely for warranty.

Finalize Knob and Scale Alignment

Remove protective film, press knob and scale together for alignment and concentricity.

PITT Drum Specifications

General IconGeneral
CategoryCooktop
ModelDrum
TypeGas cooktop
Number of burners1
BrandPITT
Diameter300 mm
Height130 mm