Pittasoft Blackvue - Connection of Blackvue to a Wi-Fi Connection

7
You can connect BlackVue to your smartphone through a Wi-
Fi connection. You can change SSID and your password.
Note
y
You can connect only models that support Wi-Fi, to
the Wi-Fi network.
y
To change the Wi-FI SSID and the password, tap
BlackVue Wi-Fi > Settings > Firmware Setting >
Login Setting.
y
The initial password is blackvue, but the user can
change it.
y
For the Live View function, Wi-Fi can be used within
a 10m range, although the range may vary in some
circumstances.
y
For playback of recorded videos using Wi-Fi, recep-
tion may vary according to the data transfer rate.
y
If the Live View or VOD playback & copy function is
used while it is connected via Wi-Fi and recording Full
HD (1920x1080) @30fps, the recording frame is reduced
to 20 fps.
y
To upgrade the rmware or share your video on You-
Tube, connect to a data network. This may incur data
charges. When not using functions such as live view,
VODs, or when searching for BlackVue video list,
please use a Wi-Fi network.
Connection of BlackVue to a Wi-Fi connection