Pittsburgh Automotive 61600 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 22e
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2022 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Pittsburgh Automotive 61600 Specifications

General

Brand	Pittsburgh Automotive
Model	61600
Category	Racks & Stands
Language	English

Summary

Owner's Manual & Safety Instructions

Product Identification

Pre-use Safety Warning

Crucial warning to read material before use to prevent serious injury.

IMPORTANT SAFETY INFORMATION

General Usage and Capacity Rules

Covers capacity limits, surface requirements, load centering, and proper usage context.

Alterations and Personal Protection

Operational Safety Guidelines

Includes dynamic loading awareness, proper assembly, and keeping area clear.

Assembly Instructions

Assembly Preparation and Notes

Read safety info, note bolt types and loose assembly for easier alignment during steps 1-11.

Step 1: Prepare First Leg

Step 2: Attach Upper Braces

Step 3: Attach Lower Braces

Continuing Assembly Process

Steps 4-8: Assemble Remaining Legs and Braces

Step 9: Install Connectors

Final Assembly Steps

Steps 10-11: Mount and Secure Column Base

Position the column with its flanges and secure the lower flange to the connectors.

Step 12: Secure Column Upper Flange

Fasten the column's upper flange to the tops of the legs, ensuring no twisting.

Step 13: Fully Tighten Assembly Hardware

Steps 14-17: Install Saddle, Handles, and Shaft

Operation Instructions

Operation Procedure

Steps to position, raise, and secure the saddle to support a part, ensuring stability.