Page 6 For technical questions, please call 1-888-866-5797. Bottle Jacks
Lowering
Handle over
Release Valve
Saddle
Fulcrum
1. Remove all tools, parts, etc.
from under the vehicle.
2. Position the Saddle under the lifting
point. Place Handle over Release
Valve and turn the Handle firmly
clockwise to close the Release Valve.
3. Move the Handle to the Fulcrum and
pump to raise the vehicle slightly above
the saddle(s) of the jack stand(s). Then,
collapse and remove jack stand(s).
4. Move the Handle back to the Release
Valve and slowly turn the Handle
counterclockwise (never more than two full
turns) to lower the vehicle onto the ground.
5. Lower the Jack completely. Then,
store in a safe, dry location out
of reach of children’s reach.
To Next Page
Loading...
