Pittsburgh 69259 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 17k
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2017 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and s er vi ce m ay n ot be i nc lu de d.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Pittsburgh 69259 Specifications

General

Batteries Included	Yes
Battery Type	AA
Laser Class	Class II
Self Leveling Range	±4 degrees
Working Range	30 feet

Summary

IMPORTANT SAFETY INFORMATION

General Safety Warnings

Laser Light Safety Precautions

Avoid direct eye exposure to laser light to prevent severe eye injury and follow all safety instructions.

SPECIFICATIONS

UNPACKING Instructions

Assembly Procedures

Tripod Setup and Stabilization

Unfold tripod, adjust legs to desired height, and lock arms securely.

Rotating Head Adjustment

Raise and lower the rotating head using the handle for height adjustment.

Mounting the Laser Level Body

Secure the laser level body onto the tripod using the designated knob.

Operating Instructions

Initial Leveling of Rotating Head

Use adjusting knobs to center bubbles for initial leveling of the rotating head.

Maintaining Horizontal Level

Check and adjust knobs after rotation to ensure the horizontal bubble remains centered.

Installing and Removing Batteries

Maintenance and Servicing Guidelines

Cleaning, Maintenance, and Lubrication

Parts List and Assembly Diagram

Limited 90 Day Warranty Information