Pittsburgh TORQUE WRENCH 239 User Manual

TORQUE WRENCH
239, 807, 808,
2696, 3293
ASSEMBLY AND OPERATING INSTRUCTIONS
Model 239, 1/2” Drive Torque Wrench shown above.
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2009 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09l

Pittsburgh TORQUE WRENCH 239 Specifications

General

Brand	Pittsburgh
Model	TORQUE WRENCH 239
Category	Power Tool
Language	English

Summary

Assembly and Operating Instructions

Important Safety Warning

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Important Safety Information

Safety Alert Symbol Explanation

Explains the safety alert symbol and its use to warn about potential personal injury hazards. Obey all safety messages.

Understanding Safety Symbols

Defines DANGER, WARNING, CAUTION, and NOTICE symbols and their associated risk levels. Includes CAUTION without symbol.

General Safety Precautions

Lists essential safety rules for operating the torque wrench, including protective gear, proper use, inspection, and maintenance.

Specifications

Model 2696 and 807 Specifications

Details torque range, drive size, length, and accuracy for models 2696 and 807.

Model 239, 808, and 3293 Specifications

Details torque range (ft-lb), drive size, length, and accuracy for models 239, 808, and 3293.

Unpacking and Initial Checks

Unpacking Instructions

Guidance on checking the torque wrench for damage or missing parts after unpacking and contacting support.

Operating Instructions

Preparation for Use

Steps for wearing safety gear, cleaning threads, and fitting the correct socket onto the torque wrench.

Setting the Torque

Instructions on how to set the desired torque value by adjusting the lock knob and handle graduations.

Operating Instructions (Continued)

Using the Torque Wrench

Steps for locking the handle, setting direction, pulling until click, and resetting for storage.

Cleaning, Maintenance, and Lubrication

Tool Failure Safety Warning

Cautionary advice to prevent injury from tool failure, emphasizing inspection and correction of issues.

Maintenance Procedures

Guidance on pre-use inspection, re-lubrication, cleaning, professional calibration, and proper storage.