2
At an alarm time the watch vibrates and time is
displayed. Alarm 1 vibrates for 40 seconds (wake
-up alarm). Alarms 2-8 vibrate for 20 seconds.
When the watch alarm vibrates you can press
either button to stop the alert.
When setting the watch, press and hold the
appropriate button for 3 seconds to enter the
setting. A short press adjusts the number.
Practice with the settings initially as it takes a little
while to get used to them. The LED turns off
quickly (exiting the setting) if you are not prompt
when pressing the buttons.
If nothing is pressed the watch will exit setting
after 4 seconds.
Watches are supplied with factory set demo
alarm times. Adjust the alarms to suit your needs.
To Next Page
Loading...