Pivotell Vibratime - Setting the Time

3
Setting the Time
1, Press the right button once - the 24 hour clock
will appear.
2, With the LED still on press the right button again
and hold for 3 seconds to set the hours.
4, The hours will appear alone on the left (central
dots will be blinking).
5, With the LED still on press the press the left
button to increase, the right button to decrease.
6, When the hour is correct and with the LED still
on press the right button for 3 seconds to set the
minutes.
7, The minutes will appear alone on the right
(central dots will be blinking).