6
C, Once at the correct hour, press the left button
for 3 seconds to adjust the minutes. The minutes
will appear on the right side.
D, Press the left button to increase, the right
button to decrease. When the minutes are
correct, alarm 1 is set.
Now program any further alarms required (2-8):
To turn an alarm on/off ensure the correct alarm
is displayed by pressing the left button until it is
displayed (ie. A2OF, A3OF, etc.) and press the
right button once to change it to ON or OFF.
Set the times for alarms 2-8: With the correct
alarm displayed (ie. A2ON, A3ON, etc.) press the
left button once to see that alarm time on the
LED. Then follow instructions ABCD above.
To Next Page
Loading...