7
Recharging
Remove the watch from the rubber casing and
charge the watch using the USB cable provided.
The watch charges in approximately 1 hour.
When replacing the watch in the rubber casing
ensure that the watch buttons are correctly
positioned in the strap under the rubber buttons.
Battery life
Battery life between charging: appx 6 days,
although this will depend on the number of
alarms set & length of time the vibrations are
allowed to run / frequency LED light is on. At 20%
or less the LED will display _ _:00 after the time as
a reminder to recharge.
We recommend that the Vibratime is not
recharged every day unless necessary.
To Next Page
Loading...