Need help?Do you have a question about the Pixmob WASH 3.5 and is the answer not in the manual?
General| Brand | Pixmob |
|---|---|
| Model | WASH 3.5 |
| Category | DJ Equipment |
| Language | English |
Explains the infrared transmitter's function for wirelessly controlling PixMob luminous objects via DMX.
Details technical specifications including operating temperature, water protection, physical dimensions, electrical ratings, and communication protocols.
Provides safety guidelines for using the Wash, including protective eyewear specifications and distance recommendations.
Details the product label information including model, manufacturing date, ratings, and certifications.
Instructions for mounting the Wash unit onto a lighting truss using clamps and safety cables.
Guidance on properly orienting the Wash for optimal IR signal coverage, adjusting beam direction and head angle.
Details how to connect multiple Wash units in a daisy chain, including DMX termination and ferrite recommendations.
Describes the sequence of displays shown on the unit's screen upon power-up, including boot and firmware versions.
Instructions on how to navigate the menu to select and change the DMX channel using the unit's buttons.
Explains how to display the current operating temperature by holding specific buttons on the unit.
Instructions to flip the display screen orientation by holding specific buttons on the unit.
Guide on how to switch the device's protocol between Pro2 and Auto modes via the menu interface.
Explains the meaning of the green (DMX) and blue (IR) LED indicators for diagnosing unit status.
Provides methods to check IR LED functionality using protective glasses, a power meter, or a phone camera.
To Next Page