Assembling
9. Transport the oven carefully. Place a
verticle pallet, make sure not to block the
leg bolt holes in the bottom of the oven
10. Check the maximum height of the
pallet truck/genie lift so the oven is high
enough to bolt the legs underneath
11. Place more pallets under to reach the
desired height
12. Turn the oven upright carefully
13. Place pallet truck/genie lift in front
of the oven
14. Lift the oven high enough to bolt the
legs easily
15.Continue at step 26 for legs installa-
tion
For 3 to 4 Decks Ovens Follow
Steps 16 to 20
16. Remove the front and back wooden
stick
Steps for 3 to 4 decks ovens
Installation – Assembly oven
To Next Page
Loading...
