pizzato FR Series - User Manual

Sheet:
Date: :
15367-0-en-2.1.0
2017/12/26
FR 593
Article:
Description: Interruptor de seguridad con actuador separado
© 2017 Copyright Pizzato Elettrica.Technical modifications and errors reserved. The data quoted in this sheet are carefully checked and represent typical series values.
Descriptions of device and its applications, the control contexts, details on external controls, installation and operating information are given to the best of our knowledge. This does not mean however that any assured
properties or other claims under liability law that extend beyond the “General Sales Terms” as stated in the Pizzato Elettrica general catalogue may be derived. T he user is not absolved of his obligation to examine our
information and recommendations before using them for his own purposes.
Alojamiento:
Carcasa de polímero, entrada de conducto de rosca PG 13,5 (serie FR)
Caracteristicas Generales:
Ambient temperature: from -25°C to +80°C
Max actuation frequency: 3600 operations cycles/hour Mechanical endurance:
20 million operations cycles
Contact block characteristics:
Acción rápida 1NA + 1NC (B5) .
Travel diagram:
Apertura positiva:
Si
Cross section of the conductors
(flexible copper wire):
min. 1 x 0,5 mm2 (1 x AWG 20)
max. 2 x 1,5 mm2 (2 x AWG 16)
Device screw tightening torques:
Cover screws: 0,7 ... 0,9 Nm
Head screws: 0,5 ... 0,7 Nm
Lever screws: 0,7 ... 0,9 Nm
Contact blocks screws: 0,6 ... 0,8 Nm Plugs:
1,2 ... 1,6 Nm (M20/PG13,5)
1 ... 1,4 Nm (M16/PG11)
In conformity with requirements requested by: Activating forces:
Low Voltage Directive 2014/35/EU Electromagnetic Compatibility Directive 2014/30/EU
In conformity with standards:
Min. : 0,06 Nm
Positive opening: 0,25 Nm
IEC 60947-5-1, EN 60947-5-1, EN 60947-1, EN 50047, IEC 60204-1, EN 60204-1,
EN ISO 14119, EN ISO 12100, IEC 60529, EN 60529, UL 508,CSA 22.2 No. 14.
Approvals:
IEC 60947-5-1, UL 508, CSA 22.2 No. 14, GB14048.5-2001.
Markings and quality marks:
Electrical data: Utilization categories:
Thermal current (Ith): 10 A
Rated insulation voltage (Ui): 400 Vac 500 Vdc Rated
impulse withstand voltage (Uimp): 4 kV
Conditional shot circuit current: 1000 A according to EN 60947-5-1 Protection
against short circuits: fuse 10 A 500 V type aM
Pollution degree: 3
Alternate current: AC15 (50...60 Hz) Ue (V)
250 400
Ie (A) 6 4
Direct current: DC13
Ue (V) 24 125 250
Ie (A) 6 1,1 0,4

Summary

Device Description and Intended Use

Device Description

Installation Instructions

Actuator Type Selection

Use provided or specific compatible actuators for switch activation.

Device Head Orientation

Fixing the Device

Fix device with at least 2 M4/M5 screws (resistance class 4.6+, flat heads). Tightening torque 2-2.5 Nm.

Fixing the Actuator to the Guard

Fix actuator immovably to door frame with 2 M4/M5 screws. Tightening torque 1.2-1.6 Nm.

Switch-Actuator Alignment

Electrical Connections

Operation and Safety Instructions

Access Monitoring

Switch alone not sufficient for operator safety in danger area. Additional protection needed.

General Use Instructions

Mechanical Stop Requirement

Maintenance and Functional Tests

Do not disassemble. Perform sequence of tests before commissioning and annually.

Wiring Guidelines

Operator Protection Functions

Comply with safety standards like EN 60947-5-3, EN ISO 13849-1, EN 62061.

Technical Data and Compliance

General Technical Data

Electrical Data (No Connector)

M12 Connector Versions

Compliance with Standards

Lists applicable standards such as EN 60947-5-1, EN ISO 14119, UL 508, CSA 22.2 No. 14.

Compliance with Directives

Lists directives including Machinery Directive 2006/42/EC, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU.

pizzato FR Series Specifications

General

Brand	pizzato
Model	FR Series
Category	Switch
Language	English