ASSEMBLY INSTRUCTIONS
PAGE
6
TO COLLAPSE STAND FOR TRANSPORT
1) Slide shelf away from grill capsule to allow capsule to be removed.
2) Lift grill capsule o of stand.
3) Pull both upper tube sections of stand up and together.
4) Slide shelf into place to secure stand in collapsed position.
7) Lay stand down with PK-TX™ logo facing up.
8) Place grill capsule on stand using rubber grill mounts.
9) Use tie-downs as needed to fasten grill capsule and other items to stand.
(Tie downs not included)
PK-TX™ STAND CARE
• Clean as needed with damp cloth and mild soap.
• Sweep ashes out of lower ash trays after each use.
To Next Page
Loading...