PK TX - Step 3: Attaching Brand Plate and Handle; Step 4: Securing the Lid and Shelf

ASSEMBLY INSTRUCTIONS
PAGE
5
Sawtooth Washers
Sawtooth Washers
4) Assemble lid handle to grill lid
capsule.
5) Place grill lid capsule on top of
grill bottom capsule. Open and close
the lid once to ensure the hinge is
properly seated.
6) Snap PK-TX™ Durabilium™ shelf
onto PK-TX™ stand to secure grill
bottom capsule to stand. The shelf
will sit on top of the tabs on the grill
capsule - holding it in place.
3) Assemble Original PK brand plate
to grill lid capsule.