EasyManua.ls Logo

Pkm WT8+5BE - Page 112

Pkm WT8+5BE
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
~ 112 ~
specified load only!). A higher load can lead to inefficient washing and / or
drying results.
IMPORTANT INFORMATION!
Do not dry the following items in your appliance:
net curtains, wool, materials with metal-made or metal parts
nylon tights
large pieces of laundry, e.g., anoraks
blankets, puffs, bedrolls, eiderdowns
items made of foam material or containing parts of foam material.
If you combine a washing programme with the drying function, you can choose
between the following modes: AUTO-DRYING or TIME-DRYING. The
combination with the drying function is not available for all washing programmes
(see chapter 4.3 THE ADDITIONAL FUNCTIONS).
HAND WASH: select the programme « SPIN » and set the highest spin speed to
spin the laundry. Select the drying function (AUTO-DRYING or TIME-DRYING)
using the « DRYING » - BUTTON. Start the selected drying programme using the
« START / PAUSE » - BUTTON.
Do not overload the appliance. If the laundry is not dry completely, split the
laundry into two loads and dry it again.
To prevent burns, the appliance will reduce the temperature inside the drum
before a drying programme ends. Do not stop the appliance during the cooling
down period.
NOTICE! If the laundry contains too much moisture, the drying time is
extended automatically (for the mode « AUTO-DRYING » only). In this case,
the display may show « 0:20 »for a longer time. This is normal and does
not indicate a malfunction.
HOW TO ACTIVATE AND START THE DRYING FUNCTION ONLY
1. Ensure that the laundry to be dried is suitable for drying in a tumble dryer. Always
observe the textile labels!
2. Put the laundry to be dried in the drum. Always observe the maximum load
(depending on the type of laundry / s. chapter 4. THE WASHING PROGRAMMES).
3. Open the water tap!
4. Switch on the appliance using the « ON / OFF » - BUTTON. The appliance is now
switched on and in STANDBY MODE.

Table of Contents