~ 120 ~
2. Press and hold the « SPEED » - BUTTON and the « SMART WASH » - BUTTON
simultaneously for at least 3 seconds.
3. An acoustic signal sounds.
4. The acoustic signals are activated.
5.4 Door Lock
WARNUNG! If you stop a running programme, the temperature of the
water, the laundry and the drum can be very high. Be very careful while
removing the laundry. RISK OF SCALDING! RISK OF BURNS!
The appliance is equipped with an automatic door lock.
➢ After programme start, the door lock is activated automatically and the
operational status indicator of the door lock « » goes on. The door is locked.
The door is always locked while a programme is running. It is not possible to
open the door while the door lock indicator is on. To open the door by force
can damage the appliance seriously.
1. The door lock is activated. The operational status indicator of the door lock « »
is on.
2. Press the « START / PAUSE » - BUTTON if you want to open the door (e.g., to reload
laundry).
3. It is very important to check the water level and water temperature inside the
drum before opening.
4. The door lock is deactivated after approx. 2 minutes. The operational status
indicator of the door lock « » goes off.
a. If the running washing / drying programme permits the deactivation of the
door lock, the operational status indicator of the door lock goes off;
requirements: the temperature in the washing drum is less than 50 °C and / or
the current programme has not progressed too far.
5. You can open the door.
OR
1. The door lock is activated. The operational status indicator of the door lock « »
is on.
2. Press the « START / PAUSE » - BUTTON.