INDICATORS / DISPLAY DO NOT WORK.
1. Check the energy supply.
2. Circuit board damaged.
2. Please contact your aftersales
service.
3. Wiring harness damaged.
3. Check the wiring harness (please
contact your aftersales service if
necessary).
SOME DETERGENT REMAIN IN THE CONTAINER.
1. Accumulated, damp detergent.
1. Clean the container.
➢ Use liquid detergents.
➢ Use detergents suitable for washers
only.
UNSATISFACTORY WASHING RESULTS.
1. Heavily-contaminated laundry.
1. Select a suitable programme.
2. Wrong amount of detergent.
2. Choose the proper amount of
detergent (look at the information on
the packaging of your detergent).
ABNORMAL NOISE / SEVERE VIBRATIONS
1. The shipping bolts are still in the
appliance.
1. Remove the shipping bolts.
2. The appliance is not installed and /
or adjusted properly.
2. Install and / or adjust the appliance
properly.
3. Foreign objects are in the appliance.
3. Remove any foreign objects.
4. Load the appliance properly.
5. The laundry has accumulated at one
side of the drum.
6. Laundry which cannot be spaced is
in the drum.
6. Remove the pieces which cannot be
spaced.
DRYING LEVEL HAS NOT BEEN REACHED / DRYING-TIME IS TOO LONG.
1. Selected programme is unsuitable.
1. Select a drying programme suitable
for the laundry to be dried.
2. Load volume is too big.
To Next Page