If the appliance is connected to an integrated drainage system, make sure that it
is equipped with a vent to prevent water from running in and out at the same
time (siphon effect).
Make sure that the water drain hose does not have any kinks.
Secure the water drain hose so that it cannot fall down. PLEASE NOTE: After the
washing phase, the machine drains the hot water.
A small hand wash basin is not suitable as a drain.
Use a water drain hose of the same type for extension and secure the connections
with clamps. The maximum permitted length of the water drainage hose is
2.50 m.
2.7 Connection to the mains
DANGER! Do not connect the appliance to the mains if the appliance
itself or the power cord or the plug are visibly damaged. RISK OF
ELECTRIC SHOCK!
DANGER! Never touch the power plug, the power switch or other
electrical components with wet or damp hands. RISK OF ELECTRIC
SHOCK!
➢ Operate the appliance with 220 ~ 240 V AC / 50 Hz only.
➢ The technical data of your energy supply must meet the data on the rating label.
The main current circuit must be equipped with a safety shut-down device.
➢ Do not use an extension cord, a socket board or a multi socket.
➢ Do not modify the plug provided with the appliance, if it will not fit the outlet,
have a proper outlet installed by a qualified electrician (not covered by the
guarantee).
➢ The plug must always be accessible after installation. Connect the appliance
with the safety plug to a properly grounded and dedicated safety socket
only. Use a safety socket to minimise any risk of electric shock.
To Next Page
Loading...