First Setup
Install the stand base
1. Lay the
LED LCD Monitor
flat on a table with the LED screen face down. To prevent the monitor
from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand.
3. Stand the
LED LCD Monitor
up.
Disconnecting the stand base
1. Lay the
LED LCD Monitor
flat on a table with the
LED
screen face down. To prevent the
LED
LCD Monitor
from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Hold the monitor down with one hand. With the other hand, use two fingers to press the
hooks down as directed below.
3. Remove the base from the stand.
6
To Next Page
Loading...
Need help?
General
