How to hook up PLANCHA TONIO Griddle?
If you're having trouble hooking up your PLANCHA TONIO Griddle, make sure you're using an approved hose with the correct diameter. It may also be necessary to replace the gas hose. The gas hose screws into the gas bottle on one end and the plancha on the other. Ensure it is properly fastened: black for the bottle end, silver for the plancha.
Why does the fire not ignite on my PLANCHA TONIO LAGOA LG2_1F?
If the fire on your PLANCHA TONIO Griddle does not ignite, there could be several reasons. First, ensure the gas bottle isn't empty and is in the 'on' position. If it's been activated for safety, rearm the connector. A blocked injector can also be the culprit; try unblocking it at the burner level by opening the control knob and injecting pressured air at the gas intake. Similarly, a blocked hose can prevent ignition, so try blowing into the flexible hose. Check the spark at the burner level. If there are no sparks, contact after-service. Also, inspect the wire connecting the Piezo electric unit to the white spark plug for good condition and secure connection. Defective ignition button can cause ignition problems, so check its condition and connection. For electric models, verify the batte...
Covers procedures and requirements for connecting the plancha to various gas types and standards.
Provides important safety notes and guidelines regarding the flexible gas hose.
Details the procedure for performing a leak test on gas connections to ensure safety before use.
Highlights critical safety warnings related to gas leaks and appliance usage.
Outlines essential safety precautions for using the plancha griddle, including fire prevention.
Provides instructions on how to safely change the gas bottle, including repeating leak tests.
General| Category | Griddle |
|---|---|
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Plate Material | Cast iron |
| Thermostat | Yes |
| Indicator Light | Yes |
To Next Page