AERMACCHI MB-339
38
PRINTING & CONSTRUCTION MANUAL
© PLANEPRINT
EN
Turn on the transmitter and connect the batte-
ry. When checking the control directions, look
at the aircraft from behind.
1. Move the aileron lever to the left. The right
aileron should move down and the left
aileron should move up so that the aircraft
tilts to the left.
2. Move the aileron lever to the right. The right
aileron should move up and the left aileron
down so that the aircraft is tilting to the
right.
3. Pull back the elevator lever. The elevators
should move up, causing the aircraft to rise.
4. Push the elevator lever forward. The eleva-
tor should move down so that the aircraft
sinks.
5. Move the rudder lever to the left. The rud-
der should move to the left.
6. Move the rudder lever to the right. The rud-
der should move to the right
7. Move the flap switch to position 2. The flaps
should move down by the set value „half“.
8. Move the flap control switch to position 3.
The flaps should move down by the set
value „whole“.
AILERON
RUDDER
ELEVATOR
FLAPS
To Next Page
Loading...