Important note about charging the capacitor
This capacitor must be charged BEFORE connecting the POWER and GROUND
cable to the capacitor.
Failure to charge the capacitor will result in a large spark generated form the rapid
inflow of current which can be very dangerous.
Electrical connections for PC20F
Make all wiring connections as shown in the diagram, but do not attach the
incoming positive cable to the capacitor positive terminal.
Connect the positive terminal only after following the instructions for charging the
capacitor on page 8.
HEAD UNIT
AMPLIFIER #1
REMOTE
TERMINAL
AMPLIFIER POWER
TERMINALS
REMOTE
TERMINAL
CHASSIS
GROUND
POINT
DISTRIBUTIONBLOCK(—)
DISTRIBUTIONBLOCK(+)
AMPLIFIER POWER
TERMINALS
REMOTE
TERMINAL
AMPLIFIER #2
o
o
FUSE/FUSE
BLOCK
CAR
BATTERY
o
o o
O o
o
MAKE THIS CONNECTION
ONLY AFTER CHARGING
THE CAPACITOR!!!
CHASSIS
GROUND
POINT
WIRING DIAGRAM:
PC20F in Two Amplifier System
PCIOF • PC20F • User's Manual - page 6
To Next Page
Loading...
