Planet Audio PNV9645 User Manual

Troubleshoot power issues by checking fuses or performing a reset.

Troubleshoot no image display by resetting MPU operation.

Enable video playback while driving by parking and engaging the brake.

Adjust EQ modes (OFF, POP, ROCK) by sliding the icon.

Set sound effects like SUB, Phase, Freq, FAD, LOUD, BAL.

Configure the time zone for accurate time display.

Control power on/off and mute audio output.

Insert SD card or USB device for media playback.

Assign vehicle buttons to functions by pressing and holding.

Save the configured steering wheel control settings.

Access factory settings menu to configure region, logo, etc.

Reset all unit settings to their original default mode.

Turn the unit on or off with a press.

Cycle through available audio and video sources.

Adjust the audio volume level up or down.

Replace the remote control battery when performance degrades.

Access navigation by touching icon in main menu.

Understand factors affecting GPS signal reception.

View the rear camera image for parking assistance.

Connect video and audio input plugs to their respective jacks.

Turn the unit on with the open key, and off by holding it.

Access and exit the radio interface from the main menu.

Switch between radio bands (FM1, FM2, FM3, AM1, AM2).

Scan for stations or browse stored frequencies.

Insert, play, or eject discs from the unit.

Pause and resume playback of media.

Select the next song in the playback list.

Play audio, video, or photos from SD/external memory.

Access and exit the Bluetooth interface.

Make calls, answer, switch, or hang up using the interface.

Pair mobile phone with car unit via Bluetooth.

Steps for pairing phone: enable BT, scan, connect with password.

Understand factors affecting GPS signal reception.

Switch to reverse video when car is reversing.