FIG .1
INTRODUCTION
OL ED IND I CAT ORS
C S 3
12
A
C
FIG.1
The Trigger Detection Indicator A is used to indicate the state of the
trigger.
MICROSWITCH NOT ACTUATED
The trigger is in a released or forward state.
MICROSWITCH ACTUATED
The trigger is in a pulled or rearward state.
The sound indicator B is used to indicate whether the speaker is on
or off.
SOUND ENABLED
Sound is used to indicate certain events.
SOUND DISABLED
Sound has been muted.
When displayed, the Bluetooth
®
indicator C is used to indicate that
Bluetooth
®
is enabled. Only applicable if the Bluetooth
®
module
has been installed.
BLUETOOTH
®
ENABLED
Bluetooth
®
is On.
IMPORTANT: If the Bluetooth
®
module is NOT installed then
all relevant Bluetooth
®
parameters will be automatically
excluded from the menus.
B
To Next Page
Loading...
