PLANET ECLIPSE CS3 - Page 11

FIG.1
A
C S 3
11
INTRODUCTION
OL ED IND I CAT ORS
B
FIG.1
When displayed, the Service Indicator A is used to indicate that the
marker requires some user maintenance. See page 32 for more.
LUBRICATION REQUIRED
The marker has fired a sufficient number of shots to
warrant lubrication.
SERVICE REQUIRED
The marker has fired a sufficient number of shots to
warrant a service.
A Preset is a group of parameters designed to control the firing
mode of the marker.
A Factory Preset is one that has been built into the marker
firmware and is designed to conform with the rules of a particular
paintball league or industry recognised standard.
The Factory Preset Indicator B is used to indicate whether or not
the currently selected preset is one of the Factory Presets.
FACTORY PRESET
The parameters conform to a factory preset.
NOT A FACTORY PRESET
The parameters do not conform to a factory preset.