ELECTRONICS
US ER INT E RFA CE PARA METE RS
C S 3
50
FIG .2
TRAINING PARAMETER
Simulates the firing cycle using a audible beep
to represent a shot fired, allowing the user to
practice their trigger technique without firing
the marker.
> ON : Training mode enabled.
> OFF : Training mode disabled.
FIG .1
RESET PARAMETER
Resets the servicing counters.
> NO : do not perform a reset.
> LUBE : Reset the NEXT LUBE counter.
> SERVICE : Resets both the NEXT LUBE
and the NEXT SERV counters.
FIG .4
NEXT SERV
This non-adjustable item displays the number
of shots before the next service is due.
To Next Page
Loading...
