PLANET ECLIPSE Etek STAR Frame - Page 27

SET-Up mENU
3.0 - 25.0
3.0 - 25.0
51 - 99
1 - 49
0 - 100
Off
On
Cancel
Opto
Switch
Cancel
Lo Power

Cancel
Off
On
Cancel
Off
On
Cancel
PULL
BACK

Time in milliseconds that the trigger must be released before a pull can be recorded
Top limit (trigger activation point) of debounce band expressed as a percentage
Bottom limit (trigger release point) of debounce band expressed as a percentage
Percentage Trigger Transition Filter tolerance

Training mode disabled
Training mode enabled
Cancel training mode selection
Use opto sensor to detect trigger operation
Use micro-switch to detect trigger operation
Cancel trigger detection method selection
Select standard BBSS power level
Select high power level for BBSS
Cancel BBSS power level selection
Turn off audible indicator

Cancel audible indicator selection
Turn off auxiliary output
Turn on auxiliary output
Cancel auxiliary output selection

Return to the Run Screen
TRAININ
RELEASE
BAND HI*
BAND LO*
TT TOL*
TRIGGER
BBSS
BEEPER
BACK
HARDWARE
SIG OUT
EXIT
27.
mENU TREE