THE LOAD pRESET
pARAmETER CONT...
> CANCEL:
Editing is cancelled and the parameter remains
unchanged.
> USER 1:
that have been previously saved by the user.
> USER 2:
parameters that have been previously saved by the user.
With the exception of FACTORY each of the Presets
mode of the Etek STAR Frame, leaving Filter, Timing and
THE SAvE pRESET
pARAmETER (SAvE)
This parameter is used to save the current set
> USER 1:
Save the current parameters as the Preset
‘USER 1’
> USER 2:
Save the current parameters as the Preset
‘USER 2’
> CANCEL:
Editing is cancelled and the parameter remains
unchanged.
THE FIRING mODE pARAmETER
(mODE)
Etek STAR Frame and has the following choices:
> SEmI:
> RAmp:
above the rate at which the trigger is pulled once certain
criteria have been met. These criteria are set by the
parameters on the RAMP SET menu.
> CANCEL:
Editing is cancelled and the parameter is
unchanged.
pLEASE NOTE: CERTAIN mODES mAY ONLY bE AvAILAbLE
IN CERTAIN COUNTRIES AND ON CERTAIN mODELS OF THE
ETEk STAR FRAmE.
To Next Page
Loading...
