THE bALL pARAmETER (bALL)
Tumbling paintballs can take time to settle in the breech
is used to set the amount of time that a paintball has to
be in the breech before the Etek STAR Frame is allowed
milliseconds in 0.5ms increments.
THE pULL pARAmETER (pULL)
The PULL parameter is used to set the minimum
amount of time that the trigger must be pulled before
it is recognised as a valid trigger pull. This parameter
can be set between 1.0 and 20.0 milliseconds in 0.5ms
increments.
To Next Page
Loading...
