The PLANET Industrial L2+ Multi-port Gigabit PoE+ Managed Ethernet Switch is designed for robust and high-speed data transmission in demanding industrial environments, extending networks via fiber optic cabling. It features an IP30-rated rugged aluminum case and a redundant power system, capable of handling up to 40Gbps switch fabric for large volumes of video, voice, and critical data. The switch offers user-friendly IPv6/IPv4 management interfaces and extensive L2/L4 switching functions, making it a suitable investment for industrial network expansion or upgrades.
Important Technical Specifications:
The device comes in three models: IGS-10020PT, IGS-10020HPT, and IGS-20160HPT.
- Copper Ports:
- IGS-10020PT/IGS-10020HPT: 8 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports.
- IGS-20160HPT: 18 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports.
- SFP/mini-GBIC Slots: All models include 2 x 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10 for 10020 models; Port-19 and Port-20 for 20160HPT), compatible with 100BASE-FX SFP.
- PoE Injector Port:
- IGS-10020PT/IGS-10020HPT: 8 ports (Port-1 to Port-8) with 802.3at/af PoE injector function, supporting up to 36 watts per port.
- IGS-20160HPT: 16 ports (Port-1 to Port-16) with 802.3at/af PoE injector function, supporting up to 36 watts per port.
- PoE Power Budget: 240W maximum for 10020 models, 320W maximum for 20160HPT (depending on power input).
- Console: 1 x RJ45-to-RS232 serial port (115200, 8, N, 1).
- Switch Architecture: Store-and-Forward.
- Switch Fabric: 20Gbps/non-blocking for 10020 models, 40Gbps/non-blocking for 20160HPT.
- Throughput: 14.8Mpps@64Bytes packet for 10020 models, 29.7Mpps@64Bytes packet for 20160HPT.
- Address Table: 8K entries, automatic source address learning and aging.
- Shared Data Buffer: 4Mbits.
- Jumbo Frame: 9Kbytes.
- ESD Protection: 6KV DC.
- Enclosure: IP30 aluminum case.
- Installation: DIN-rail kit and wall-mount kit.
- Power Requirements:
- IGS-10020PT: DC 48V~56V.
- IGS-10020HPT: DC 12~48V.
- IGS-20160HPT: Dual 48~56V DC.
- Power Consumption:
- IGS-10020PT: 255 watts max., 870BTU (Full loading with PoE function).
- IGS-10020HPT: 11.1 watts/37.87BTU (Power on without any connection).
- IGS-20160HPT: 349 watts/119.08BTU (Full loading with PoE function).
- Digital Input/Output: 2 Digital Input (DI) and 2 Digital Output (DO).
- Operating Temperature: -40 to 75 degrees C.
- Storage Temperature: -40 to 85 degrees C.
- Humidity: 5 to 95% (non-condensing).
Function Description:
The Industrial Managed PoE+ Switch offers a comprehensive set of features for network reliability, security, and management:
- Redundant Ring Technology: Supports ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) and Spanning Tree Protocol (802.1s MSTP) for rapid self-recovery (as fast as 10ms) in industrial automation networks, preventing interruptions and intrusions.
- Intelligent Powered Device Alive Check: Monitors connected PD status in real-time via ping. If a PD stops responding, the switch recycles the PoE port power to bring it back online, enhancing network reliability and reducing administrative burden.
- PoE Schedule for Energy Saving: Allows activation or inactivation of PoE power feeding for each port during specified time intervals, contributing to energy savings.
- Robust Layer 2 Features: Includes dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control, and IGMP/MLD snooping for advanced switch management.
- IPv6/IPv4 Full-function Secure Switch: Supports both IPv4 and IPv6 protocols, advanced L2 to L4 data switching, redundancy, QoS traffic control, network access control, authentication, and secure management features.
- IPv4 and IPv6 VLAN Routing: Enables crossover between different VLANs and IP addresses for secure, flexible management and simplified networking.
- Intelligent SFP Diagnosis Mechanism (SFP-DDM): Monitors real-time SFP parameters like optical output/input power, temperature, laser bias current, and transceiver supply voltage.
- Flexible and Extendable Solution: Features 100BASE-FX and 1000BASE-SX/LX SFP fiber-optic modules, allowing flexible selection of transceivers based on transmission distance or speed.
- 1588 Precision Time Protocol (PTP): Supports MEF service delivery and timing over packet solutions for IEEE 1588 PTP and synchronous Ethernet, crucial for industrial computing networks.
- Industrial Protocol: Supports Modbus TCP for real-time monitoring in SCADA systems and IEEE 1588v2 PTP.
- Digital Input and Digital Output: Allows detection of external device status (e.g., door intrusion) via Digital Input and sending event alarms to administrators. Digital Output can alarm administrators for link-down, link-up, or power-dead events.
Usage Features:
- Management Interfaces: Equipped with console, Web, and SNMP management interfaces.
- Web-based Management: Provides an easy-to-use, platform-independent interface via a standard web browser (Microsoft Internet Explorer 8.0 or later recommended).
- CLI Mode Management: Offers Cisco-like commands via Telnet or console port for system administration, displaying statistics, and changing settings.
- SNMP-based Network Management: Compatible with external SNMP-based applications (e.g., HP Openview, What’s Up Gold) using SNMP v1, v2c, and v3 for secure access.
- PLANET Smart Discovery Utility: Simplifies deployment management by easily listing devices in the Ethernet environment, allowing configuration of MAC Address, Device Name, firmware version, IP Subnet address, and passwords.
- Auto-Negotiation: STP ports automatically set the best possible bandwidth, speed, and duplex mode when connecting to another network device.
- Port Mirroring: Allows monitoring network traffic by forwarding a copy of incoming or outgoing packets from one port to another for analysis.
- VLAN Support: IEEE 802.1Q tagged VLAN, Q-in-Q tunneling, Private VLAN Edge (PVE), MAC-based VLAN, Protocol-based VLAN, Voice VLAN, and GVRP.
- Link Aggregation: Supports Static LAGs (Port Trunk) and LACP LAGs to increase bandwidth and provide link redundancy.
- Quality of Service (QoS): Advanced traffic prioritization features including classification, DiffServ Code Point (DSCP), service levels, policies, and QoS profiles to manage network congestion, reduce delay, and improve performance.
- Security Features: Access Security (Access Control Lists, Port Security), DHCP Snooping, IP Source Guard, and ARP Inspection to prevent unauthorized access and spoofing attacks.
- Power over Ethernet (PoE) Management: Includes total PoE power budget control, per-port PoE function enable/disable, admin-mode control, port power feeding priority, port power limit, and PD classification detection.
- Intelligent PoE Features: Temperature threshold control, PoE usage threshold control, PD alive check, and PoE schedule.
Maintenance Features:
- Firmware Upgrade: Web-based firmware upgrade functionality.
- Configuration Management: Save startup configuration, download/upload configuration files (running-config, startup-config, default-config), and activate configurations.
- Factory Default Reset: Option to reset the switch to factory default settings via the web interface or a physical reset button.
- Diagnostics: Includes Ping (ICMPv4/ICMPv6) for troubleshooting IP connectivity and Cable Diagnostics for identifying cable length and common faults on copper cables.
- System Log: Provides system log information for monitoring device events.
- Remote Syslog: Configurable to send syslog messages to a remote server for centralized logging.
- SMTP Configuration: Allows setting up SMTP parameters for email notifications.
- Fault Alarm: Configurable to enable fault alarms for power failure or port link failure, with options for system log, SNMP trap, or both.
Need help?
General
To Next Page
