Need help?Do you have a question about the Planet ICS-2200T and is the answer not in the manual?
General| Cabling technology | 10/100Base-T(X) |
|---|---|
| Ethernet LAN (RJ-45) ports | 2 |
| Baud rate | 921 Kbit/s |
| Data bits | 5, 6, 7, 8 |
| Isolation | 2 kV |
| Stop bits | 1, 1.5, 2 |
| Parity bit | Even, Mark, Odd, Space |
| Certification | FCC 15 A, CE A IEC60068-2-32, IEC60068-2-27, IEC60068-2-6 |
| RS-232 signals | CTS, DCD, DSR, DTR, GND, RTS, RXD, TXD |
| RS-422 signals | GND, RxD+, RxD-, TxD+, TxD- |
| RS-485 signals | Data+, Data-, GND, RxD+, RxD-, TxD+, TxD- |
| Flow Control type | DTR/DSR, RTS/CTS, XON/XOFF |
| Flow control support | Yes |
| Networking standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Serial interface type | RS-232/422/485 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Surge protection voltage | 1 kV |
| Electrostatic Discharge (ESD) protection | 15 kV |
| Product color | Blue |
| Housing material | Metal |
| International Protection (IP) code | IP30 |
| LED indicators | Activity, Fault, Link, Power, System |
| Input voltage | 12 - 48 V |
| Power source type | DC |
| Server operating systems supported | Windows Server 2003, Windows Server 2008, Windows Server 2012 |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8, Windows XP |
| Sustainability certificates | RoHS |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating temperature (T-T) | -40 - 75 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Weight | 477 g |
|---|---|
| Dimensions (WxDxH) | 32 x 87.8 x 135 mm |
Provides an overview of the front panel components and indicators of the Industrial Serial Server.
Explains how to initiate the Web Management interface for the Industrial Serial Server.
Details the process of logging into the Industrial Serial Server using its default IP address and credentials.
Describes how to log in to the Industrial Serial Server using Telnet for remote console management.
Provides instructions on downloading and installing the VCOM Utility software from the PLANET website.
Explains how to use the VCOM utility to search for and discover connected Serial Servers on the network.
Details the process of logging into the Serial Server using the VCOM utility after the device is found.
Guides users on how to configure the Industrial Serial Server's settings using the VCOM utility interface.
Describes how to map physical serial ports to virtual COM ports on the PC using the VCOM utility.
To Next Page
