3
Earbuds can only be paired and connected
with one device at a time. See “Switch Devices”
section for more detail.
1. READY
Firsttime,rightoutofthebox:
With earbuds turned off, activate Bluetooth
pairing mode by pressing Power/Pairing
button. The LED flashes red/blue to indicate
pairing mode.
Pairingnewphone/reconnectingoriginal:
With earbuds turned off, press Power/Pairing
button until the LED flashes red/blue.
2. SET
Activate the Bluetooth feature on your device,
then use phone menus to “add”, “search” or
“scan” for new Bluetooth devices.
Phones have different menus to select from:
iPhone: Settings > General > Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone: Settings/options >
Bluetooth: On > Search for devices
Android
™
smartphone: Wireless & Networks >
Bluetooth: On > Scan for devices
3. CONNECT
Select “PLT_BBTGO” from the list of Bluetooth
devices shown on your device.
If device asks for a passcode, enter four zeros
(0000). You may see **** on screen.
Some devices also ask to confirm connection
after pairing.
The earbud’s LED will stop flashing red/blue
once successfully paired/connected.
You can now make a call using your device’s
keypad or voice-dialing feature and enjoy
audio listening from your device.
GET CONNECTED
LED
POWER
R
PLT_BBTGO
To Next Page
Loading...
Need help?
General
Weight and Dimensions
