11
8 Gently place the lifter on the desk phone in the pre-determined position.
9 Press firmly to adhere.
If You Do Not Hear a Dial Tone
1 If you do not hear a dial tone, raise the lifter height switch to the next highest position.
2 Repeat steps 3 through 6 above as necessary until you hear a dial tone.
3 When you hear a dial tone, secure the lifter as described in steps 7 though 9.
Additional Parts (If Required)
Use extender arm when the handset lifter needs additional stability lifting and returning
handset to cradle.
Extender Arm
1 Slide extender arm onto lifter.
2 Stabilizers can be shifted left and right. Position stabilizers on outsides of handset to gently
grip the phone.
1
2
2
To Next Page
Loading...
