7
Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538
Why use a handset lifter? The lifter greatly simpli es using
a headset with your desk phone. It lets you answer and
end calls without being near your phone.
INSTALL AUTOMATIC HANDSET LIFTER
4
STEP
FIRMLY press Lifter power
cord into
RED labeled port
on Headset Base.
Automatic
Handset Lifter
Headset Base
(bottom view)
The HL10™ Automatic Handset Lifter is included with certain SupraPlus Wireless con gura-
tions and is also available separately. See www.plantronics.com/SupraPlusWireless for a
complete list of accessories.
1. Verify that the base-to-desk phone cable is connected to the handset port of the desk
phone, and not the headset port (Refer to Step 2, Con guration A).
2. FIRMLY PRESS the Handset Lifter power cord into the RED labeled port to ensure a
complete connection.
A. Connect Handset Lifter power cord to Headset Base
To Next Page
Loading...
Need help?
General
