Plantui 6 Smart Garden - User Manual

Add 3 liters of water with 3 spoonfuls of nutrients to the water bowl, do not exceed the 3-liter limit line.

Remove label centers and place capsules in six empty holes. Do not leave holes empty, except the seventh for water.

Plug in the device and place the Light Unit without a Height Block; pink lights indicate germination and irrigation start.

The device sleeps for 8 hours daily. Adjust the sleep timer by holding your hand on the Light Unit for 3 seconds.

Add the first Height Block when leaves appear, and the second before leaves touch the Light Unit.

Refill with 2 liters of water and 2 spoonfuls of nutrients when the pump is noisy or water runs out.

Activate by holding hand on Light Unit for 10 seconds (lights turn purple) to slow growth and reduce water use.

Harvest plants when they are sufficiently grown. Check specific growing instructions and harvest times online.

Use citric acid solution to clean deposits. Hold hand on Light Unit for 15 seconds until lights turn blue to activate pump.

Wash the bowl, plant tray, and water tray after each crop. Hand wash the pump. Do not wash electrical parts.

Align watering pieces by water holes. Ensure the pump is locked securely after cleaning.

Visit the website to explore new plant varieties and flavors for your smart garden.