Plastimo SX-350 - Menu Operation; Entering and Navigating Menu; Menu Options; Main Technical Specifications

10
■ Menu Operation
Menu operation method as follows,
1. Press [MENU] key to enter menu mode. Press [▲]/[▼] key to select the desired menu
item.
2. Press [MENU] key to enter setting status. Press [▲]/[▼] key to select the desired setting.
3. Press [C/16] key to exit menu mode.
Display
Items
Options
Beep Tone
of（OFF）/on（ON）
Channel Group
Selection
USA/INT/CAN/WX
Function Selection
of/SCAN/DUAL
Weather Alert
of（OFF）/on（ON）
Priority Scan
of（OFF）/on（ON）
Scan Resume Timer
of（OFF）/on（ON）
Dual/Tri-Watch
d-（Dual Watch）/t-（Tri Watch）
Backlight Level
of（OFF）/1/2/3
LCD Contrast
1/2/3/4
Channel Display
3d（3 Digits）/4d（4 Digits）
Auto Power Save
of（OFF）/on（ON）
Monitor Function
Pu（Push）/ Ho（Hold）
■ Main Technical Specifications
Items
Index
General
Specifications
Frequency Range
TX:156.000-162.000MHz
RX:156.000-163.275MHz
Modulation Mode
FM (16K0F3E)
Frequency Interval
25kHz
Battery
DC3.7V, 1750mAh Li-ion
Frequency Stability
±2.5ppm
Operating Temperature
-20℃～＋60℃
Waterproof Level
IP67 (1 Meter Depth for 30 Minutes）
Dimensions (W×H×D)
63mm×120mm×35.5mm
Weight (With Battery)
183 g
Transmmiter
Specifications
Output Power
3W/1W
Output Current
≤ 2A/1.2A
Max. Frequency Deviation
±5kHz
Spurious Emission
≤ 0.25µW
Adjacent Channel Power
≥ 65dB
Transmit Audio Distortion
≤ 5%
Receiver
Specifications
Receive Sensitivity
≤ 0.2µV
Signal-to-Noise Ratio
≥ 40dB
Adjacent Channel Selectivity
≥ 65dB
Spurious Response Immunity
≥ 70dB
Intermodulation Rejection
≥ 68dB
Audio Output Power
≥ 0.6W